As you may refer to the image above, there are situation when we do dimensioning in drafting whereby the dimensions are quite close to each other. This may create issues especially in the aspect of drawing clarity.
To tackle this you may use a function call funnel within the dimension properties.
- Right click on the dimension that you want to apply the funnel. Select the Properties.
2. Go to the Extension Line tab. Check the box for Funnel. Adjust the Height, Angle and Width accordingly to suit your application.
If you just want to apply on one side, make sure to change the Funnel Side accordingly. Select OK to accept the properties change.
3. Now you can see that the dimension 41 had been applied a funnel where we can see clearly the difference between the two dimension. And since i only use on one side you also can see that the funnel only applied on the right side of the dimesnion.