DraftSight

2. Define the Block setting

Rename the Block, add description if needed and set the units.

You may check on Allow block to explode.

Select the Base point from graphic area or enter specific coordinates.

Select entities that you want to make as a block from graphic area and press Enter.

3. Base Point is the Insertion point.

4. Open  drawing to insert the block.

5. Insert Block

Insert > Block > Insert Block

6. Insert Block setting

Choose the block to add.

You may click on Specify later for Position and Rotation or you may enter specific coordinates.

Remain the Scale to 1.

7. Specify in the graphic area where you want to add the Bolt