Sensors are used to monitor specific properties based on Sensor Types in a part or assembly. For more information about Sensor Types and Alerts, visit: https://wiki.cadcam.com.my/knowledgebase/sensor-types-and-alerts/
In this post, we will be discussing about how to use Proximity Sensor to monitor the proximity between a location and a component.
If the range becomes less than 20 mm, an alert will be triggered.
- Add sensor
Under the FeatureManager design tree, right-click the Sensors folder and click Add Sensor.
Select Sensor Type: Proximity and make the following selections:
Enter the Proximity sensor range = 20 mm.
Check on Alert and then select is true.
The proximity alarm is on with a warning that an interference is detected.